THE TABLE JACK | The most advanced table stabilizer system on the market

 

See other amazing products at: www.chillsolution.com

Follow us on: Find The Table Jack on Facebook Find The Table Jack on Twitter Find The Table Jack on Youtube Find The Table Jack on Linked In

Home > More Info > Installation Instructions



Buy Replacement TableJacks Here


DOWNLOAD INSTRUCTIONS

Installations Instructions

The are three types of table legs to which the Table Jack can be attached: 1) Inset Table Leg; 2) Flush Table Leg; or 3) Raised Table Leg. Please check to see to which version of table leg you will be installing the Table Jack. Fits bottom table widths up to 2 1/4” wide.

Step 1
Turn table over and remove the four table glide screws from each leg. Install the 3 black table glides to three of the four table legs using 3 (1/4” x 20“ x 1 3/4”) screws. If the table bottom is inset, install the included spacers on each glide.


Step 2
Based on the type of table leg, refer to the drawings below for the necessary parts that need to be installed.