INSTALLATIONS INSTRUCTIONS

THE ARE THREE TYPES OF TABLE LEGS TO WHICH THE TABLE JACK CAN BE ATTACHED: 1) INSET TABLE LEG; 2) FLUSH TABLE LEG; OR 3) RAISED TABLE LEG. PLEASE CHECK TO SEE TO WHICH VERSION OF TABLE LEG YOU WILL BE INSTALLING THE TABLE JACK. FITS BOTTOM TABLE WIDTHS UP TO 2 1/4” WIDE.

STEP 1
TURN TABLE OVER AND REMOVE THE FOUR TABLE GLIDE SCREWS FROM EACH LEG. INSTALL THE 3 BLACK TABLE GLIDES TO THREE OF THE FOUR TABLE LEGS USING 3 (1/4” X 20“ X 1 3/4”) SCREWS. IF THE TABLE BOTTOM IS INSET, INSTALL THE INCLUDED SPACERS ON EACH GLIDE.


STEP 2
BASED ON THE TYPE OF TABLE LEG, REFER TO THE DRAWINGS BELOW FOR THE NECESSARY PARTS THAT NEED TO BE INSTALLED.